Product Description
Made in Europe, AzureFilm is a high-quality PLA resin, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging. Compatible with the majority of FDM 3D printers.
Printing Recommendations:
|
Nozzle Temperature: Heated Bed Print Speeds: Build Platform: |
200-230°C Not Required (recommended 50-60°C) 50-100 mm/s Glass bed, Kapton, Blue Tape, PEI, Buildtak |
Filament PLA Strongman™, is as solid as ABS filament and still has the functionality of ordinary PLA material.
Filament Strongman was developed out of users need of having simple to print material just like PLA, with much more improved formula for toughness and resistance. We joined forces with one of the best universities for polymer characterization and created material that is one of a kind on the market. Many of our customers do not like the ABS filament since it creates difficulties during the printing process. Compared to conventional PLA filament, the PLA Strongman is much tougher and impact resistant. It is used for printing drones, bearings and all kind of products that require greater strength.
Regarding the temperature resistance, this filament is equal to the ordinary PLA filament. For superior results, you must print at a temperature of 200–230°C and the printing table should be heated to 50-60°C. Please note that the range in the print temperature may slightly differ depending on the use of other printers.
Strongman filament has a net weight of 1 kg (2.2 lbs), in the welding position on the reel of 210 mm in diameter, with an inside opening of 60 mm and a width of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of the PLA filament is 1.75 mm and is produced in more than 5 different shades.
