Creatbot PEEK-300
PEEK-300
THE LEADER OF ULTRA HIGH
PERFORMANCE 3D PRINTERS
Ultra high temp. nozzle/bed
Advanced Thermal System
Direct Annealing System
Water cooling/ Heat isolation system
Medical/Industry application
Direct Annealing System
Direct Annealing System (DAS), the world's first and extraordinary technology by CreatBot. The annealing process is instantly controllable during printing. It aims to provide the best quality parts first time without warping or cracking. Printing of big size functional models is no issue. (The technology is patent protected and available by CreatBot only)
DAS annealing process features :
1）Instantaneously: Finished during printing process, no need for secondary treatment in an oven.
2）Completely: The annealing process points to every extruded filament layer, not the whole printed model. The internal structure of the whole model could not be fully crystallized or will deform in oven.
3）Controllable: The surrounding temperature can be adjusted to 0-200 °C. the different requirements of toughness and strength can be met by adjusting the DAS temperature function at different material parts.
Before Annealing
After Annealing
Before Annealing
After Annealing
Heat control system
High temperature hotend
Heat bed
Heated chamber
Parameters
Hotend max. 480°C with dual extruder
Heatbed max.200°C
Heated chamber max. 120°C
Build volume: 300 x 300 x 400 mm
Triple heat isolation and liquid cooling system
DAS
The Direct Annealing System (DAS) is a revolutionary technology designed and patent-protected by CreatBot. It is the most advanced technology applied to 3D printing high-performance material.
Printing Materials
Engineering Plastics: PLA, PC, ABS, PA6, PETG, PVDF, POM-C, PP, TPU
High temperature Material: PPSU, PEI (ULTEM), PA12, PSU, PPS, PA-CF
Ultra performance material: Medical grade PEEK, PEEK, PEKK, PEEK-CF (Carbon fiber), PEEK-GF (glass fiber), etc
Smart Auto-rising dual extruders 480 ℃
The PEEK-300 equiped with CreatBots new technology, smart Auto-rising dual extruders. Water cooling, DAS system, Auto-rising extruders. The dual nozzle temperature up to 480°C. You can print any 3D printer material in the world. We say it is best choice for polymer materials.
Heatbed 200°C
Allows for the printing of large models with no warping
Heated Chamber 120°C
No warping
Eliminating the cracking of prints
Cooling System
The cooling system is one of the important parts to constitute the whole thermal system. It is made of
(1) liquid cooling. Circulating liquid can be used effectively for a long period of time.
(2) Air pump cooling. Air pumps provide cold air from outside instead of hot air inside the chamber.
Product Parameters
Printing
| Build Volume: |
Single Extrusion: 300x300x400mm Dual Extrusion: 240x300x400mm |
| Filament Diameter: | 1.75mm |
| Number of Nozzles: | Dual Extruder |
| Print Speed: | 10-120mm/s |
| Nozzle Diameter: | 0.4mm (0.3-1.0mm optional) |
Filament Compatibility
| Filament Compatibility: | Engineering Plastics: |
| PLA, ABS, ASA, PC, Nylon, PETG, PVDF, TPU, Carbon Fiber. High-temperature Material: Ultra-PA, Ultra PA-GF, UltraPA-CF, PPSU, PEI(ULTEM). Ultra-performance material: PEEK, CF-PEEK (Carbon fiber), GF-PEEK (glass fiber), PEKK, etc. |
Software
| Software: | Creatware, Simplify3D, Cura, Slic3r |
| Operating Systems: | Win7/8/10 |
| Print File Type: | STL, OBJ, AMF, G-code |
Special Function
| Outage Restored: | Saved data when the power is off |
| Filament Detection: | Pause printing when the filament runs out |
| Direct Annealing System (DAS): | The annealing process is instantly controllable during printing. It aims to provide the best quality parts, first time without warping and cracking of big sized functional prints and materials |
| Heat Insulation: | Triple heat insulation |
| Emergency Stop Switch: | Supports emergency stop |
| High Temperature Accessories: | High temperature resistance motors, linear rails, belts, and circuits to ensure extended time and high-temperature printing |
Temperature
| Nozzle Maximum Temperature: | 500°C |
| Chamber Temperature: | 120°C |
| Build Platform Maximum Temperature: | 200°C |
| Direct Annealing Temperature: | 0-400°C |
Mechanical
| Cooling: | Air Pump and Water Cooling |
| Platform: | PCB Aluminium + PEEK print board |
| Positioning Precision: | X Y axis 0.0127mm, Z axis 0.00125mm |
| Extruder: | Direct Drive |
| Machine Construction: | Fully enclosed with a heated chamber |
| Bed Levelling | Manually / Automatic |
Electrical
| Input Power: | 240V, 20A |
| Rated Power: | 4600W |
| Screen: | 4.3" full colour touch screen, multi-language |
| Print Method: | USB Connectivity / USB Drive |
Size and Weight
| Machine Size: | 650x600x750mm |
| Net Weight: | 100kg |
| Package Size: | 820x720x1080mm |
| Gross Weight: | 130kg |