Creatbot F430




Nozzle Temperature Up To 420 ℃
The F430 is equipped with the 4th generation 1.75mm dual extruders and hot-ends. The left extruder is equipped with 260°C hotend, It is able to print with PLA, ABS, PC, Nylon, Carbon fibre, Flexible, etc. The right extruder 420°C hotend is made of martensite steel, which is able to print high-performance materials. The dual hot-end is replaceable, which provides more possibilities for your application.

High Precision & High Speed
We exclusively researched and developed the extruder feeding system and guide rail, which support high-speed printing. Its printing accuracy can reach a high of 0.04mm, and it allows it to extrude filament steadily without blockages.

Fully Enclosed + Heated Chamber 70°C
Fully enclosed chamber can block all external interference and reduce noise.
The heated chamber provides a constant temperature 70°C, which is able to prevent prints from warping, deforming and delaminating.

Outage Restore & Filament Detection
The printer will automatically memorize the current position and save the print data. Lower the platform and withdraw the filament when there is a power outage. It will continue to print from the last stopped point after powering on. No trace!

The printer will avoid invalid printing by stopping the print and warning when the filament runs out.

HEPA Air Filter
The air filter system can absorb impurities and gases that are generated by printing special filaments like ABS, Nylon and PC, safer environmental protection and are more suitable for house, school and office space.

Aviation aluminum platform + automatic leveling
The printer is equipped with a heatless aviation aluminum platform with a surface flatness of 0.02mm. The surface of the platform can be attached with a PEI special 3D printing film or Buildtak film. Most materials can be printed and adhere well to the bed.

Auto leveling sensor, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.

Product Parameters 


 Build Volume:

 Single Extrusion: 400x300x300mm

 Dual Extrusion: 320x300x400mm

 Filament Diameter:  1.75mm
 Number of Nozzles:  Dual Extruder
 Print Speed:  10-120mm/s
 Nozzle Diameter:  0.4mm (0.3-1.0mm optional)

Filament Compatibility

 Filament Compatibility:  Engineering Plastics:
   PLA, ABS, ASA, PC, Nylon, PA12, PA6, PET-G, CPE-HT, PCTG, BVOH, PVA, PVDF, TPU, HIPS, PP, Flexible, Wood, Carbon Fiber


 Software:  Creatware, Simplify3D, Cura, Slic3r etc
 Operating Systems:  Win7/8/10 MAC OS
 Print File Type:  STL, OBJ, AMF, G-code

 Special Function

 Outage Restored:  Saved data when the power is off
 Filament Detection:  Pause printing when the filament runs out
 Automatic Shutdown:  Turns the power off automatically when printing is complete


 Nozzle Maximum Temperature:  420°C
 Chamber Temperature:  70°C


 Machine Construction:  Powder coated Steel, Aluminium casting for motion components
 Build Plate:  Glass Ceramic panel
 Positioning Precision:  X Y axis 12.7μm, Z axis 1.25μm
 Extruder:  Direct Drive
 Stepper Motors:  1.8° Step Angle with 1/16 Micro-stepping
 Bed Levelling  Automatic


 Input Power:  240V
 Rated Power:  220V: 2700W
 Screen:  4.3" full colour touch screen
 Storage Media:  U Disk
 Connectivity:  USB

 Size and Weight

 Machine Size:  620x485x680mm
 Net Weight:  48kg
 Package Size:  750x580x720mm
 Gross Weight:  62kg